My Store
7000A Car Jump Starter 26800Mah Power Bank 150PSI Pump Air Compressor Emergency Battery Booster Power Bank Start
7000A Car Jump Starter 26800Mah Power Bank 150PSI Pump Air Compressor Emergency Battery Booster Power Bank Start
Regular price
$92.64
Regular price
$0.00
Sale price
$92.64
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
About KIT 1 description:
Power source: direct battery operation. Display type: digital tube, LED. Battery safety: lithium protection combined with software. Charge and discharge safety: lithium protection combined with software. Lighting features: LED flashlight/lighting, red and blue flashing alert, SOS signal.
Function of the power bank: When activated, the USB output charges the mobile device. If inactive, it will automatically power down after 30 seconds, causing the display and button lights to turn off. When the battery level drops below 10%, the battery indicator will blink as a reminder; there is no USB output when it is off. The brightness of the display light is determined by the maximum brightness permitted by the LED beads.
Specifications of the product include: Material made of ABS, an inflation pressure range from 0.20 to 10.5 Bar (3 to 153 PSI), a cylinder inner diameter of 22mm, an inflatable air volume of roughly 22 liters per minute, a blowing air volume of around 250 liters per minute, a working current of no more than 6A, a working voltage of 14.8V, a power consumption of up to 88W, and a noise level not exceeding 85 decibels.
How to operate: To turn on the device, press and hold the "power on" button for 2 seconds. To shut it down, press and hold the "power on" button for 2 seconds while it is on, and it will automatically turn off after 1 minute of inactivity. To change units, long press the "Unit Adjustment" button while the device is on to toggle between the four units: "PSI, BAR, KPA, KG/CM2."
Mode change: Press the "Unit Adjustment" button while the device is on to toggle among the five modes: "Bicycle, Motorcycle, Car, Basketball, and Pressure Maintenance Mode."
Tip:
·If power on fails, please do not power on continuously. Remove
and wait for 1 minute before powering on again to prevent damage
the product to the product due to continuous operation.
and wait for 1 minute before powering on again to prevent damage
the product to the product due to continuous operation.
·
When the smart ignition clip is inserted into the product, the indicator light
flashes red and green alternately, indicating that the product i
normally. Clamp the ignition clip to the positive and negative poles of the
s operatingcar battery accordingly.stays on, which means the ignition can be started. On the contr
The ignition clip indicator light turns to green andary, if the indicator light turns to red and stays on, the ignition cannot be operated.
normally. Clamp the ignition clip to the positive and negative poles of the
s operatingcar battery accordingly.stays on, which means the ignition can be started. On the contr
The ignition clip indicator light turns to green andary, if the indicator light turns to red and stays on, the ignition cannot be operated.
· Ordinary ignition clamps do not have indicator lights. Please do not reverse
the positive and negative poles during operation (be careful no
the connections! Danger!)
t to reverse
the connections! Danger!)
t to reverse
About KIT 2 description:
About kit 3 description
